Smart Self-alarming tag
(AM 58kHz)
The tag sounds an alarm
1) when a shoplifter takes merchandise with a tag out of the store without payment or
2) when a shoplifter tries to remove the tag intentionally before payment,
so shoplifters can be identified very easily.
And as Tags / Remo Controls can be assigned the store-specific ID for its SET/RESET signal, another store's remote control cannot reset the tag.
Smart Switch tag
Switch tag sounds an alarm
1) when a shoplifter takes merchandise with a tag out of the store (antenna) without payment or
2) when a shoplifter tries to remove the tag intentionally before payment.
| Model | SMT–ST |
|---|---|
| Size(mm) | H68×W26×D12 |
| weight(g) | 19 |
Smart Wire tag
Wire tag sounds an alarm
1) when a shoplifter takes merchandise with a tag out of the store (antenna) without payment or
2) when a shoplifter tries to remove the tag intentionally before payment, such as cutting wire or removing wire.
| Model | SMT–WT |
|---|---|
| Size(mm) | H76×W27×D13 |
| weight(g) | 21.5 |
Feature of Smart self-alarming security tag
1.Higher sensitivity
Smart tag sensitivity is much higher than conventional tag of other security companies.
When these smart tags are used together with the smart antennas, store merchandises can be protected even at wide entrance.
2.High quality
Tags are produced in the factory with thorough quality control process.
We continue to improve the quality.
3. Long tag battery life
Low power consumption design and usage of long life battery realize the long battery life of 5 years.
(cf) Actual tag battery life depends on its tag usage condition.
4.Easy operation
It is easy to apply the tags to merchandises and
apply SET/RESET operation to the tag,
so the security system operation is basically easy.
Tag wrapping tape / film
To apply the tags to merchandises, the following accessories are prepared.
①Soft wrapping film
②Hard wrapping tape
③Double faced adhesive tape